SmCo bar magnet in full brass body
This Excello bar magnet is produced in a full brass body with SmCo material as the magnetic holding force. The bar magnet is highly suitable for holding applications where the surface is very smooth.
- High magnetic strength – up to 600 Newton
- North and south pole on the same surface
- Possibility of acquiring the magnet with thread
- Tolerance in height vary +0.3/- 0.3 (see specifications)
- Max temperature: 200 °C
- If special requirements our technical department will be of assistance
- Part of the Excello product series
Art. no. | D mm | H mm | Newton | Kg | Price (Excl. VAT.) | Qty |
---|---|---|---|---|---|---|
15500 | 6 | 20 | 8 | 0,8 |
| |
15510 | 8 | 20 | 22 | 2,2 |
| |
15520 | 10 | 20 | 40 | 4,1 |
| |
15530 | 13 | 20 | 60 | 6,1 |
| |
15540 | 16 | 20 | 125 | 12,7 |
| |
15550 | 20 | 25 | 250 | 25,5 |
| |
15560 | 25 | 35 | 400 | 40,8 |
| |
15570 | 32 | 40 | 600 | 61,2 |
|
This special bar magnet with SmCo magnet is produced with a full brass body as a standard. However, it is also possible to produce the bar magnet with an internal thread according to the requiered quantity.
The bar magnet forms part of the Excello quality series for extra certainty regarding the strength and durability of the bar magnet.
This type of bar magnet is characterized by having a narrow surface between the north and south pole providing the bar magnet with a particularly high magnetic strength. As a consequence, the bar magnets is often used for applications where the surface is very smooth and where there is no risk of occurring any air gap between the magnet and the surface. Furthermore, the magnet is almost free of any kind of maintenance.
Magnetic strength for the SmCo bar magnet
The holding force of this SmCo bar magnet is high and reaches up to 600 newton at the largest dimension. See the complete list of dimensions and magnetic strengths above.
Dimensions
The SmCo bar magnets are produced in 8 different standard dimensions. See the list of dimensions in the overview above.
Other Excello bar magnets
The SmCo bar magnet in brass body can also be produced with internal thread according to the required amount. The bar magnet is also produced with a full steel body.
Remarks
The holding forces have been determined at room temperature on a polished plate made of steel (S235JR according to DIN 10 025) with a thickness of 10 mm by pulling the magnet vertically from the surface (1kg~10N). A deviation of -10 % (max.) in the stated values is possible in exceptional cases. In general, the value will be exceeded.
Material | SmCo |
---|---|
Surface | Brass body |
Max temperature | 200 °C |
Type | Full body |
Tolerance for art. no. 15500-50 | +/- 0.2 in height |
Tolerance for art. no. 15560-70 | +/- 0.3 in height |
10 Newton ~ approx. 1 kg. | |
Certifications | RoHS, REACH, PAC free, Code of Conduct |
All prices exclude vat.
Please note, that a handling fee of EUR 6 will be added to orders below EUR 65.
Please refer to our general terms and conditions